Showing all 6 results
Universal insulation adhesive roll in polyethylene foam with a controlled and constant density of 22 kg/m³. This strip is necessary to seal all the joints of the various acoustic products, both for floors and walls.
Format |
Roll |
0,10 x 100 m |
Packaging |
Reel |
1500 m |
Thickness |
mm |
3 mm |
Height |
mm |
10 cm |
Single-sided acrylic tape with non-woven fabric, gray colour, specific for sealing and joining underfloor acoustic membranes. Suitable for both floating floors and stone or thermal insulating floors whose installation requires the use of glues or adhesives.
Thickness |
mm |
0,55 mm |
Format |
Roll |
0,05 x 50 m |
Packaging |
Box |
300 ml |
Height |
mm |
50 mm |
Special adhesive perimeter band with “L” shaped bend. The total adhesiveness of the vertical part makes it easy to lay, while the 8 cm wide and 2 mm thick overhang also allows reducing noise horizontally. The product is suitable for separating the screed and the floor from vertical partitions and must be laid in a continuous manner without interruptions. The excess strip should be cut only after the final covering has been laid.
Format |
Roll |
Variabile |
Packaging |
Bag |
Variabile |
Thickness |
mm |
5 mm |
Height |
mm |
10 cm, 15 cm, 20 cm |
White polyethylene foam band 5 mm thick and total height 20 cm, equipped with pre-cut to facilitate “L” folding; The vertical part of the band (15 cm high) must be positioned against the wall and is partially adhesive to allow easier trimming at the end of the work, while the horizontal part (5 cm high) is completely adhesive for more effective adhesion to the acoustic mantle. The excess strip must only be cut after the final covering has been laid.
Format |
Roll |
0,15 x 100 m |
Packaging |
Bag |
700,0 ml |
Thickness |
mm |
5 mm |
Height |
mm |
15+5 mm |
Adhesive perimeter strip in extruded polyethylene foam with a density of 22 kg/m3, coupled with a protective overhanging nylon layer to cover the panel above. The product is suitable for separating the screed and the floor from vertical partitions. This strip is particularly suitable for applications with underfloor heating.
Format |
Roll |
Variabile |
Packaging |
Bag |
Variabile |
Thickness |
mm |
8 mm |
Height |
mm |
10 cm, 15 cm, 20 cm |
Adhesive perimeter strip (AD) in extruded polyethylene foam with a controlled and constant density of 22 kg/m³. This product is suitable for separating the screed and floor from vertical partitions, effectively preventing the creation of harmful acoustic bridges. The product must be laid in a continuous manner without interruption, and the excess strip must be cut only after the final covering has been laid. This type of strip is also available in a non-adhesive version (N).
Format |
Rolls |
Variabile |
Packaging |
Bag |
Variabile |
Thickness |
mm |
3, 5, 8, 10 mm |
Height |
mm |
10 cm, 15 cm, 20 cm |