Showing all 8 results
Resilient insulation layer made up of chemically cross-linked polyethylene with added EVA, coupled with an elastomeric layer of 2 kg/m2. Excellent, highly versatile and resilient underlay suitable for concrete underslabs and dry foundations, effective on both heavy and light floors.
Resilient insulation layer made up of chemical cross-linked polyethylene with a density of 35 kg/m3, low dynamic rigidity and excellent noise reduction thanks to the special additive. It can be applied on many different types of heavy floors and is available in thicknesses of 5 and 10 mm. An adhesive backing can also be provided upon request.
Resilient impact sound membrane obtained by bonding a high-quality recycled rubber layer with a density of 720 kg/m3 and thickness of 3 mm, to vibration-damping felt in recycled fibres with a density of 600 g/m2 and thickness of 4 mm. This combination results in impact sound insulation with nominal thickness of 7 mm and very high acoustic performance, eco-sustainable and adaptable to all types of floors.
Resilient insulation layer made up of 32/35 kg/m3 expanded polyethylene foam coupled with specific heat-reflecting aluminised protective film. Its special grooved shape gives it a high dissipative power, which makes it extremely effective for laying under traditional systems in the presence of radiant floor panels.
Resilient and vibration-damping underlay made up of a compound of recycled natural rubber bonded to polyurethane adhesives with a density of 680 kg/m3, available in thicknesses of 5 and 8 mm. It is particularly suitable for application under thick concrete slabs and on both heavy and light floors.
Resilient insulation layer made up of polyethylene foam with uniform density over the entire surface of 30 kg/m3, available in thicknesses of 3, 5 and 10 mm. It is particularly suitable for heavy floors and guarantees excellent stability of the slab at an extremely low cost.
Resilient insulation layer made up of a bituminous membrane of 1.7 kg/m², reinforced with thin glass layer and coupled with sound resistant non-woven material. Comes with adhesive selvedge and a thickness of about 7 mm.
Massive slab and load divider, density of 1200 Kg / m³, 25 mm thick with 50 mm wide rabbeted edge. The versatility of this product also allows it to be applied as a load distribution plate on top of a slat structure for a floor. The sheets are fixed with self-drilling phosphated screws.