Showing all 13 results
Resilient insulation layer made up of chemically cross linked polyethylene with added EVA, coupled with an elastomeric layer of kg/mq. It is characterized by its versatility of use and its adaptability both in the presence of cement screeds and dry substrates. Effective on heavy slabs and, in combination with GREENSOUND, also on light slabs.
High-resilience anti-pelt coat made of chemically cross-linked polyethylene with a density of 35 kg/mc. It is equipped with an additive thickness that gives it dynamic rigidity and a high noise abatement. Applicable on different types of solid type slabs. Available in 5 and 10 mm thickness. Upon request, it can also be adhered.
Resilient impact sound membrane obtained by bonding a high quality recycled rubber layer with a density of 720 kg/m 3 and thickness of 3 mm, to vibration damping felt in recycled fibres with a density of 600 g/m 2 and thickness of 4 mm. This combination results in impact sound insulation with nominal thickness of 7 mm and very high acoustic performance, eco sustainable and adaptable to all types of floors.
Anti-pelt coat composed of polyethylene foam 32-35 Kg/mc coupled with specific protective film aluminized thermoreflecting. It has a high dissipative power given by the particular grooved shape, extremely effective for laying under traditional systems in the presence of radiant floor panel.
Resilient and vibration damping underlay made up of a compound of recycled natural rubber bonded to polyurethane adhesives with a density of 680 kg/mc, available in thicknesses of 5 and 8.
It is particularly suitable for application under thick concrete slabs and on both heavy and light floors
Resilient insulation layer made up of polyethylene foam with uniform density over the entire surface of 30 kg/m 30 kg/mc, available in thicknesses of 3, 5 and 10 mm. It is particularly suitable for heavy floors and guarantees excellent stability of the slab at an extremely low cost.
Anti-pelting layer consisting of a bituminous membrane of 1.7 kg/sqm, reinforced with glass veil and coupled with a non-woven fabric TNT phonoresiliente. With adhesive sieve and total thickness of about 7 mm.
Massive slab and load divider, density of 1200 Kg / m³, 25 mm thick with 50 mm wide rabbeted edge. The versatility of this product also allows it to be applied as a load distribution plate on top of a slat structure for a floor. The sheets are fixed with self-drilling phosphated screws.
Acoustic coating for underfloor systems and/or sound-insulating dry sheets, 4 mm thick and 650 gr/m2 weight obtained by carding, needle-like and heat-sealing polyester fibres, 60% of which are postconsumer.
Product covered by eco-toxicological certification Oeko-tex standard 100, class 1 and GRS certification.
Acoustic covering of underfloor tiles made of a thin-cellulated extruded polyethylene foam, covered with a protective nylon scabbard of about 20 cm. It has good mechanical resistance and adapts perfectly to the irregularities of the surfaces. This material is resistant to mould, insects and parasites, it is stable over time and suitable for low thickness laminates.
Acoustic layer of subparquet made of a thin-cellulated extruded polyethylene foam, coated with 150 μm LDPE with a 10 cm wide edging that allows it to be used as a vapour barrier. The product has good mechanical resistance resulting from the characteristics of 100% closed cell polyethylene, which perfectly adapt to the irregularities of the support surfaces. This material is resistant to mould, insects and parasites, stable over time and specific for medium-thickness laminates.
Acoustic insulation underlay for parquet flooring made of 2 mm polyolefin physically cross-linked polyethylene foam, without selvedge. The cross-linked polyethylene with 100% closed cells gives the product good mechanical resistance, and allows it to adapt perfectly to surface irregularities. This material is resistant to mould, insects, and parasites, it remains stable over time and is designed specifically to reduce footfall noise.
Acoustic layer for underfloor made of 2 mm polyolefin physical reticulated expanded polyethylene coated with transparent PE 120 μm with a margin of about 20 cm. The product has good mechanical resistance resulting from the characteristics of the reticulated with cells closed at 100%, which perfectly adapt to the irregularities of the surfaces of support. This material is resistant to mould, insects and pests, stable over time and is specific for the reduction of tread noise.